AREA OF APPLICATION
Multipurpose and can be used for all grease applications in a food processing plant where non-EP, multipurpose greases are suitable
For use wherever, food and feed products may be subjected to incidental contact with the lubricant. FDA regulation requires that food handling equipment is operated with good manufacturing practices to keep the amount of lubricant in the food below 10 ppm.
Will satisfactorily lubricate most machinery and equipment used in producing, manufacturing, packaging, processing, preparing, treating, transporting, or holding food. Suitable for plain and anti-friction bearings, slides, guides, and other moving parts.
Can also be used where no contact with the food is expected. In most cases, the grease of unknown or questionable purity can be eliminated.
For lubrication and sealing of cocks and seals, even for lubrication of cocks in breweries. For all grease lubricated machinery in canneries, beverage bottlers and canners, potato/corn chip processors, candy manufacturers, meat and poultry packers, frozen food processors, and other food producers and processors. They are specifically recommended for critical applications where there is a possibility of the lubricant becoming an incidental or accidental food ingredient.
BENEFITS
- H-1 Approval for Use Where Incidental Contact with Food May occur
- Meet FDA Requirements, 21 CFR 178.3570
- Multipurpose
- Oxidation and Rust Protection
- Packaged in food-grade containers
- Very tacky, adhesive
- Free from mineral oil
- Not toxic
- Extremely resistant against cold and hot water
- Also resistant against alcohol and acids
- High thermal stability, high VI of carrier
- Silicone free
- Very long lubrication intervals because of excellent oxidation resistance
| CHARACTERISTICS | TYPICAL VALUES |
| Appearance | Smooth Homogeneous |
| Base | Calcium |
| Color | Off White to Light Yellow |
| Specific Gravity | 0.95 ± 0.05 |
| Drop Point | > 130 °C |
| Consistency (NLGI) |
# 2 |
| Worked Penetration |
265 – 295 |
| Water Resistance | Satisfactory |
| Copper Strip Corrosion |
Negative |
| Temperature Range |
-25°C to 120°C |
PACKING: 1 Kg Jar, 5 Kg Jar
Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization