It is a suspension of microsize Molybdenum Disulphide in Aerosol form. It gives an instant dry lubricating film which is chemically stable. It is effective in conditions where dust or dirt, cotton fluff or other foreign particles etc. exist in the environment
Description
AREA OF APPLICATION
Boundary Lubrication: For lubrication of surfaces in which the relative motion is too small to allow the formation of an oil film
Wear-in: Protection against galling and seizure of newly machined surfaces e.g. cams, slides and ways, valves, sleeves, splines, ball pivots
Press Fitting: To reduce pressures required and prevent galling and seizure e.g. antifriction bearings, splines, keyed shafts, sleeves
Release Agent: Prevents material from sticking together as in moulding and casting
Cold Metal forming: To reduce friction and heat, lengthen life and prevent pick-up on punching and forming dies and all types of cutting tools
Pre-assembly lubrication: Where maintenance lubrication is impossible or difficult due to inaccessibility of bearings e.g. enclosed mechanisms, locks, hinges, instruments, appliances, camera shutters, lock barrels and pins, pins and sleeves or air-conditioning equipment, cigarette lighter bodies, small electrical wiper blades etc
BENEFITS
Operates effectively at extremes of temperatures
Excellent oxidation resistance resulting in a longer re-lubrication interval
Reduces wear under shock/vibration load conditions
Extremely adhesive
Excellent Water Resistance
Protects from rust & corrosion
CHARACTERISTICS
TYPICAL VALUES
Appearance
Thin Dry Grey Film
Base
Moly, Resin, Solvent
Colour
Greyish
Specific Gravity
1.3 ± 0.2 (bulk)
% Volatiles
Less than 87%
Odour
Mild
Copper Strip
Corrosion
Negative
Temperature
Range
-180° C to 400° C
Propellant
Eco- friendly Blend
of Propane &
Butane
Contents
500ml when packed
Container
Aerosol tin with
25mm valve and
actuator
PACKING: 500ml Eco-friendly Aerosol Spray
Owing to evolving packaging solutions, the user is requested to kindly check the availability of a specific pack size prior to standardization.